NOW AVAILABLE AGAIN!!!
THE ORIGINAL - RLS
250 3D tabs
Spacers enable use as a joint cross.
Openings in the base of the tabs ensure optimum adhesion in the corners.
Can be used for tiles with a thickness of 3 - 12 mm.
Laying (1)
Laying tiles with RLS 3D from Italmont remains
as simple as with the standard RLS version.
The 3D tab can be inserted both laterally and in
the cross joint.
It also serves
as a spacer (joint width 1.5 mm) (2)
The new 3D tab also serves as a T-spacer
when laying in a bond.
The spacers that are not required are pressed down in
the floor panel.
(3)
Levelling is carried out as with RLS Standard
by pressing the wedge into the tab. The
special pliers have an adjustable
limit. This prevents accidental tearing
of the tabs.
(4)
Removing the tabs
Once the adhesive has hardened, the tabs can simply
be pushed away with the foot. The wedges
can be used again.
(5)
Unfolding the tabs
The tabs are supplied flat. This
reduces the volume considerably and
also simplifies transport to the construction site.
In addition, the lugs are optimally protected
against damage in this way.
(6 / 7)
Simply fold up the flap. It locks into place at a 90°
position.
